Pay Your Invoice
Landscape Lighting
Grass Seed & Fertilizers
Color Water Falls
Service Plans
Timers / WiFi Controllers
Soil Sensors
Rain Sensors
Blu Lock
Rain Bird
Winterizing Info
Ever Wonder What Makes Up The Cost of a Sprinkler System?
Downloads / MultiMedia
Download Manuals
About Us
Contact Us
Email Us

We are Canada's Largest Irrigation Website

Our Website has Over Two Million hits per year! - 120,000 first time visitors per year




"We'd like a word with you about watering your lawn by hand. - Don't."

There's an easier, more effective way to water your lawn. An automatic underground sprinkler system lets you enjoy a lush, healthy lawn all season long. Without lifting a finger.

The Advantages of Owning an Automatic Sprinkler System
Many people say convenience is the biggest advantage to an automatic system since they don't have to spend their time watering by hand or moving the hose around the yard. Others say extended plant life and lower water usage are the most important benefits.

Still others believe a sprinkler system is one of the most of the best financial investments they can make in their home since appearance is a key factor in determining market value. And guess what - they're all right!





Replacement parts are available in our online store only. Please call if you need help selecting the right product. Thank you

Water Works Irrigations & Illuminations Ltd.
(905) 404-9165

Every Drop Counts!


We Make It Green
Because We Think Green!

Service - Everything from Spring Openings, Winterizing, Broken Heads, Renovations, Leaking Valves, clogged Nozzles and more to keep your irrigation system running in top form

Spring Openings:

So much more than just turning the water and timer on.
Contact us to discover what service and steps are performed during the Spring Opening.


Fall Is Here....Time To Winterize

We start our winterizings the 1st of October and continue into November.

You never know when the frost will come so don't wait until the last minute.

Book Early!


We understand how important it is to have proper irrigation, especially during the warmer months. That's why we provide a quick response time and immediate emergency service should the need arise. You'll never wait days or weeks for one of our highly-trained service technicians to take care of your service needs.

We do repairs and upgrades on both our systems and systems that we didn't install.

In addition, we provide key maintenance services at specific intervals to keep your irrigation system running at optimal output. These interval maintenance services include System Winterization, Spring Turn-On, and an In-Season Check-Up.

As a Water Works customer, you will receive the exceptional service you deserve.

Sprinkler Maintenance

We can take care of whatever service that your system needs. As trees and plantings grow, it can become necessary to make adjustments to the original system. We offer a full line of services including repairs, moving and adjusting heads, or adding to the system.

Water conservation is of the utmost importance to all of us. Water Works Irrigations & Illuminations Ltd. is able to help customers conserve water by precise timing that eliminates any over watering. 

Services include:

  • Adjustments
  • Tune-ups
  • Raise heads
  • Add heads
  • Check controllers
  • Solve electrical problems
  • Find and repair leaks

If your sprinkler is not doing what it's supposed to do or what you want it to do, our Irrigation technicians will evaluate the situation and solve your problem quickly and professionally.

Winterizing Your Sprinklers

Definition - The process of preparing sprinkler heads, pipes and fittings to withstand freezing temperatures

Tips From Rain Bird to Help Keep Your Sprinklers Safe Until Next Spring

Without proper preparation your sprinkler system can be damaged by freezing temperatures. Here are some tips from Rain Bird on how to prepare your irrigation system if you live in a region where it freezes.

1. Insulate your assets.

Shut off the water supply to the irrigation system. The main shut off valve for your irrigation system needs to be protected against freezing. To prevent it from freezing make sure it is wrapped with insulation (foam insulation tape and a plastic bag), or somehow protected from freezing. If you do not have a main shut off valve, consider it a preventative investment. Any above ground piping needs to be insulated. Self-sticking foam-insulating tape or foam insulating tubes commonly found at home supply stores, are fine.

2. Stay in control.

If you have an automatic system then you will need to "shut down" the controller (timer). Most controllers have a “rain-mode" which simply shuts off the signals to the valves. The controller continues to keep time, the programming information (start times, valve run times, etc,) isn't lost, and the clock continues to run. The only change is that the valves will not activate. If your controller is responsible for activating a pump, as a precaution, remove the wires that are connected to the MV and common. This will prevent the possibility of the pump from being activated which could cause overheat damage.

An alternative to using the rain mode is simply to shut off the power to the controller. If you do, you'll need to reprogram the time and potentially all your other settings as well, in the spring.

3. Drain the pipes.

Now you need to remove the water from the pipes and sprinklers so that it won't freeze and break the pipe. There are several ways to drain your pipes: the manual drain valve, the automatic drain valve or the compressed air blow-out methods. However, since there could be potential safety risks we recommend contacting your local irrigation specialist.

4. Protect valves and backflow preventers.

Insulate backflow preventers and valves if they are above ground. You can also use insulation tape for this. Do not block the air vents and drain outlets on backflow preventers.

Please review the Rain Bird Homeowner's Guide to Winterization for detailed instructions on how to prepare your irrigation system for the Winter months.

Rain Bird Homeowner's Guide to Winterization

Troubleshooting Quick Guide


When a part of the system stays on well after it was scheduled to shut down, you know there is a problem. Sometimes the problem is an improperly set irrigation controller. In other instances, there is a mechanical failure with a control valve and the system will need to be turned off at the main water source.


Every type of controller, mechanical or digital, will have some type of OFF position. Some makes of controllers label the OFF position as RAIN OFF or simply RAIN. If turning off the controller fails to shut the system down, you must go next to the main water source for the irrigation system.


Every sprinkler system, if properly installed according to local codes, should have a separate cut off for the irrigation system. There may be a lever type handle or gate valve type handles (something like large faucet handles). Don't be surprised if you find the handles either broken or partially broken, they are notorious for twisting off due to corrosion. If the handles are gone, you may still be able turn off the water with a pair of channel locks or vice grips. Once the crises is solved, you should call a professional repair technician to locate and repair the problem.


If you have a wet spot in your lawn, first turn on your sprinkler system to see if you can spot any obvious problems. Next, be sure your controller has not malfunctioned and that you are not over watering. Turn your sprinkler system off at the control panel for a couple of days to see in this corrects the problem. If the problem persists, turn off the water at the main water supply. If the leak is in your lawn sprinkler system, the area should dry within a couple of days.


When your electronic or digital controller does not operate properly and/or will not accept a program you should try to clear the display. Remove the back up battery and unplug the controller from the wall. After approximately 15 seconds, re-power the controller and see if this solved your problem. Sometimes these controllers are affected by a power surge that causes the memory to scramble and you simply need to clear the memory. If this fails to solve your problem, you may need to call an irrigation technician.

How To Adjust Rotor Sprinkler Heads

Technical Information on Valves